When the power goes out, is your backup ready?
Remotely monitors generator fuel level, battery voltage, operating hours and fault status, and the battery and load status of UPS systems. Instantly reports grid outages, whether the generator has started and fuel theft.
From sensor to screen in one flow
A field measurement reaches you within seconds via the device and the cloud. The dots show the live journey of the data.
1 Sensors
2 Devices
DURANKA Bulut
Data collection, storage, analysis and alarm management
- Cloud or on-premise server
- Encrypted data transmission
- Unlimited history
4 Sent to you
General system features
Outage notifications
Instant SMS and notifications when the grid goes down and when the generator starts or fails to start.
Fuel tracking
The tank level is monitored continuously, with alarms for sudden drops (theft, leaks) and critical levels.
Battery health
Starter and UPS batteries are monitored; a weakening battery is noticed before an outage.
Maintenance plan
Oil, filter and periodic maintenance reminders based on operating hours.
Remote control
Test runs and stops can be done remotely; a weekly automatic test can be scheduled.
Outage report
The number and duration of outages and generator run times are reported.
Go live in 4 steps
Inventory
Generators, UPS units and control panels are reviewed.
Connection
The monitoring device is connected to the control panel and sensors.
Alarms
Outage, fuel and battery thresholds are defined.
Monitoring
All sites are monitored 24/7 from one panel.
Where is it used?
Hospitals
Areas where uninterrupted power is vital.
- Start-up check
- Critical fuel alarm
Data Centres
Monitoring UPS and generator together.
- Battery runtime
- Load tracking
Base Stations
Remote management of generators at dispersed sites.
- Fuel theft alarm
- Remote start
Factories
Backup power systems feeding production lines.
- Outage report
- Maintenance plan
Malls & Office Towers
Backup power for lifts, lighting and security.
- Weekly automatic test
- Battery health
Cold Storage Warehouses
Preventing product loss during outages.
- SMS at the moment of an outage
- Together with room temperature
Frequently asked questions
Does it work with every generator brand?
All data is read from generators whose control panel provides data via Modbus; on older panels basic monitoring is done with voltage, contacts and sensors. We check your panel during the survey.
How do you detect fuel theft?
If the tank level drops suddenly while the generator is not running, the system treats it as unusual and raises an alarm.
Can I monitor my UPS units too?
For UPS units with SNMP or Modbus support, battery, load and remaining runtime are shown on the same panel.
Is remote start safe?
Remote commands can only be given by authorised users and every command is logged. The feature can be kept disabled if you wish.
Check your backup power now, not during an outage
Let’s plan a solution that monitors your generators and UPS systems on one panel and reports fuel and battery problems in advance.